Material Dealing with Power UNIT 1
Standard Description
This electrical power unit is intended for your fork lift business, consisting of extremely efficient gear pump, DC motor, manual raise and decrease valve, tank, ect. The up and down movement are managed by the lever of your manual release valve, that is equipped with an electric switch to activate the motor. The lowing pace is controlled through the stress compensated flow control valve.
Specific Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned before set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil changing is needed following the preliminary 100 operation hours, afterwards when just about every 3000 hours.
five. The electrical power unit proven is designed to be mounted horizontally.

Material Managing Power UNIT two
General Description
This electrical power unit options electrical power up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with the lowering speed controlled through the pressure compensated flow control valve. Goods of this series is often broadly used in the business of logistic products such as fork lift, mini lift table, and so on.
Specific Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned ahead of mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and absolutely free of impurities, N46 hydraulic oil is recommended .
four. Oil transforming is needed following the original one hundred operation hours,afterwards once just about every 3000 hours.
5. The electrical power unit should be mounted horizontally.